(07) 4951 3544 Request a quote
Recent project examples Outlet-cost calculator 6-stage delivery process See case studies ACMA, AS/CA S009 & Fluke pack
Structured cabling, fibre & comms rooms · Mackay, Whitsundays & Bowen Basin

End network dropouts and messy server racks with Fluke-tested data infrastructure.

Cat6A, single-mode fibre, comms room builds and emergency rack tidy-ups for offices, clinics, schools, warehouses and industrial sites. ACMA Open registered, AS/CA S009:2020 compliant, Molex-backed where specified and every channel certified with a Fluke test report.

Request a cabling assessment → See recent project examples
Prefer to talk first? Book a 15-min call with our cabling lead →
"Tell us what you need and the local team will confirm the right scope before quoting."
Structured data cabling · Mackay region
100% Channels Fluke-tested $0 Re-pulls last 24 mo $20M Public liability
Chosen by Mackay builders & PMs · 38 commercial fit-outs delivered to program
CommScope
Molex
CommScope
Molex
38
Fit-outs delivered
$1.6M
Cabling certified
100%
Channels passed
0
Re-pulls last 24 mo
Who we wire

Cabling that proves its performance

Different environment, different cable system. We design for bandwidth, separation, heat, future support and the actual risk of the site.

Commercial fit-outs
Cat6A modules, MDF/IDF builds, riser fibre, labelled patching and handover packs.
Avg 220 outlets · 6-week program→
Industrial, mining & sheds
Armoured fibre, IP-rated terminations, rugged enclosures, elevated work platforms.
Avg 80 outlets · harsh-environment→
Education & healthcare
WiFi-dense classrooms, telehealth, PACS/EHR support, multi-floor OS2 fibre risers.
Avg 320 outlets · holidays install→
Comms rooms & rack rescue
42U racks, airflow cleanup, Velcro management, asset register and colour-coded patching.
Per-rack quote · staged cut-over plan→

Recent cabling examples by site type

Examples use suburb and site type only. Exact customer names and addresses are not published without permission.

Commercial fit-out
Office data point installation
Mackay
Work
Cat6 data outlets + patching
Area
Mackay

Installed new work-area points, patched the cabinet and left the site labelled for easier support later.

Project example
Request similar work →
Industrial
Workshop network extension
Paget
Work
Data run + comms tidy-up
Area
Paget

Extended connectivity into a work area where WiFi was not reliable enough for business systems.

Project example
Request similar work →
Regional site
Comms rack tidy-up
Hay Point region
Work
Rack clean-up + labelling
Area
Hay Point region

Cleaned up legacy patching so future phone, CCTV and internet changes could be traced properly.

Project example
Request similar work →
Regional business
Network support example
Mackay region
Work
Network / internet support
Area
Mackay region

Typical local business support scope.

Project example
Request similar work →
30-second estimate

Quick estimate of cabling spend

Drag the two sliders. We refine on a 1-hour walk-through with your builder or PM.

New fit-out
Existing workplace
Warehouse / shed
Multi-building site
804,000
10800
Capex
Builder PC sum
Tenant fit-out
Indicative model: commercial data points at roughly $210-$260 per outlet plus testing, labels and pathway complexity. Final price comes from drawings and site walk-through.
Estimated payback
3.3years
Then it's net saving for the lifetime of the system
Y1Y2Y3Y4Y5Y6Y7Y8Y9Y10
Estimated outlets220
Install allowance$146k
Risk value / year$44k
Net (long-run)$640k
Get my detailed quote →
Procurement pack

ACMA registered, AS/CA S009 compliant, Molex-backed where specified

Every fit-out ships with proof: ACMA registration, AS/CA S009:2020 separation from electrical, Molex-backed/certified cabling where specified, Fluke channel results, as-builts, labels and asset register.

Licensed & accredited
ACMA Open Registered cablers · AS/CA S009:2020 separation and safety compliance · Molex-backed/certified cabling where specified · channel-level Fluke testing for copper and fibre.
A-grade technicians
Every job is delivered by directly-employed, licensed Mackay technicians. No sub-sub-contractors, no offshore call-centres.
$20M public liability
Full public & product liability across every site. Certificate on the quote, on request.
Working at Heights
Field crew assigned to roof, ladder or elevated work hold Working at Heights credentials. Full SWMS supplied per project.
White Card crew
Construction-site work is handled by White Card holders with site induction, PPE and access requirements confirmed before arrival.
Documented handover
Every install includes the relevant handover pack: labels, test results, photos, as-builts or commissioning notes depending on the service.
Quarterly reporting
Plain-English KPI report (uptime, savings, exceptions) you can drop straight into a board pack.
1-3 year workmanship warranty
Workmanship warranty is set in the written quote, typically 1-3 years depending on the job type. Manufacturer warranties pass through.
Structured data cabling project example
Recent project examples are shown by work type and region until customers approve named case studies.
Structured data cabling · Mackay region

The 6-stage delivery process

Predictable program, no last-minute variations, no spaghetti racks. Typical 200-outlet commercial fit-out.

1
Drawings + downtime brief
Week 0
Project drawings, builder's program, legacy rack photos, outage constraints and critical systems.
2
Site walk + segregation plan
Week 1
MDF/IDF locations, cable pathway, separation from power, risers, fibre runs and rack airflow.
3
Quote & BOQ
Week 1-2
48-hr quote with outlet schedule, cable system, warranty assumptions and variation rules.
4
Pre-build racks
Week 3-6
Pre-fab racks, patch panels, labelling system, drums staged and cut-over method agreed.
5
Install + Fluke certify
Week 7-12
On-site to suit program. Permanent-link / channel testing, fibre loss testing and failed-channel remediation.
6
As-builts + warranty pack
Week 13
Fluke PDFs, as-built drawings, asset register, rack photos and warranty documentation.

Your cabling team — on-site, not labour-hire

Every project has a dedicated cabling lead, project manager and ACMA-registered crew. Based in Mackay. No labour-hire pass-throughs.

DT
Danny Treveton
Director
Project scope and site sign-off
S
Sam
Data Cable Technician
Structured cabling and site installs
M
Max
Data Cable Technician
Structured cabling and fit-outs
L
Leon
Trade Assistant
On-site install support
48-hour turnaround · no sales call first

Get your free cabling assessment

Send us your floor plan or builder's program and we'll return a fixed quote within 48 hrs. The sales call only happens if you ask for one.

Step 1 of 2 · 2 quick questions
Let's see if we're a fit
Step 2 of 2 · your details
Who should get the assessment?
First name is required.
Company is required.
Enter a valid email address.
Enter a valid phone number, numbers only.
Best time for our team to call about your quote*

We'll use these details to prepare the quote and call during your selected window.

✓
Your cabling assessment is underway
Our cabling lead is reviewing your drawings. You'll get the fixed quote and certification scope by email within 48 hours.
Prefer to talk first?
15-minute call with our team. Mon-Fri, 8:30 am-5:00 pm AEST.
Call (07) 4951 3544 →
The 7 questions builders & PMs actually ask

PM-grade FAQ

No fluff. If it can't be answered with an AS/NZS clause or a number, it doesn't belong here.

Continuity testers only prove the wire connects. Fluke certification measures NEXT, return loss, insertion loss, delay skew and resistance so your network can carry real Gigabit / 10G traffic.
Only if the work is done by or under an ACMA-registered cabler and complies with AS/CA S009:2020. Data and power separation matters for safety, interference and insurance.
Yes. Rack tidy-ups are staged out of hours with port maps, labels, pre-made patch leads and rollback windows. The goal is cleaner airflow and faster fault tracing with no trading disruption.
Yes. We service Moranbah, Dysart, Clermont, Middlemount, Glenden, Nebo and Collinsville with rugged fibre, IP-rated enclosures and mining/industrial access planning.
We can test from the MDF, isolate internal cabling faults and provide evidence. If the issue is the carrier/NBN side, you get technical proof to push the provider.
Yes. Schools, clinics and occupied offices are planned around trading, class or clinic schedules. Cut-overs and rack work can happen weekends or after hours.
No. We will show what is missing from the cheaper quote: Molex-backed components where specified, Fluke testing, AS/CA S009 compliance, labels, as-builts, warranty, asset register and a day-1 cert pack.

Ready for a cabling assessment?

Send us your floor plan or builder's program — we'll return a fixed quote within 48 hours.

Get my quote Call (07) 4951 3544
Get 48-hr quote →